Camera and photoPhoto Booth Strips: StripCut

Printable photo strips: sizes, paper and how to print them

Printable photo strips explained: the 2 x 6 inch strip, printing two on a 4 x 6 sheet, the resolution to aim for, paper and cutting.

5 min readBy Zarkon

On this page
  1. What size are photo booth strips?
  2. How to print photo strips
  3. What resolution do printable photo strips need?
  4. Paper and cutting
  5. DIY photo booth strips at a party
  6. Where Photo Booth Strips: StripCut helps, and where it doesn’t
  7. Questions people ask
  8. Sources

What size are photo booth strips?

The standard strip is 2 inches wide and 6 inches tall. You can see this in the printers that event photo booths use. DNP, a maker of dye sublimation printers used in kiosks and booths, lists 2 x 6 inch (5 x 15 cm) strips among the sizes for its DS620, made from the same rolls as its larger prints. FotoClub, a photo equipment dealer, describes the DS620A as printing and cutting two 2 x 6 inch strips from each 4 x 6 sheet, or four from a 6 x 8 sheet.

That is the whole trick behind most strips: two strips laid out side by side make exactly one 4 x 6 print. Four photos stacked in a 2 inch wide column is the classic layout; some strips use three larger photos instead.

How to print photo strips

You have three main options.

At home

If you have a printer that takes 6 x 4 photo paper, print the 4 x 6 sheet at actual size, with any “fit to page” or scaling option turned off, so the strips come out at exactly 2 inches wide. Max Spielmann recommends printing a test copy first, whether you use a home printer or a lab, so you don’t waste ink and paper if something isn’t right. Their guide also notes that many home printers aren’t designed for high quality photos, so results vary with the printer and paper.

At a photo kiosk or high street lab

A 4 x 6 sheet with two strips on it is just an ordinary 6 x 4 print to a kiosk or lab, so you order it like any other photo. This is often the easiest route for a party, because 6 x 4 is a standard size; Photo Zone calls it the classic photo album size. Check the preview before you pay: if the machine crops or adds a border, the cut line may not end up in the middle.

Online

UK online labs print 6 x 4 too. Photo Zone, for example, offers 6 x 4 prints on glossy or lustre paper. Upload the full 4 x 6 sheet rather than single strips, and check the crop in the order preview.

What resolution do printable photo strips need?

For sharp prints, labs recommend about 300 dpi. Max Spielmann and Photo Zone both give 1800 x 1200 pixels as the target for a 6 x 4 print, which works out from 6 inches x 300 = 1800 and 4 inches x 300 = 1200. By the same sum, a single 2 x 6 strip needs about 600 x 1800 pixels at 300 dpi.

Fromex, a photo lab, prefers about 1800 x 1200 pixels for a quality 4 x 6 print, and notes that smaller files can still be printed but the results will be less than optimum. A file with more pixels than needed is fine; one with too few may print soft.

Paper and cutting

  • Paper: photo paper gives the look people expect from a booth strip. Labs such as Photo Zone offer a choice of glossy or lustre finish; at home, use the photo paper your printer maker recommends.
  • Cutting: a paper trimmer or a craft knife and metal ruler gives a straighter line than scissors. Line up on the gap between the two strips and cut once down the middle.
  • Borders: if your layout has a thin white border round each strip, a small slip in the cut is much less obvious.

DIY photo booth strips at a party

For DIY photo booth strips, the simplest set-up is a phone on a stand with a self timer, a plain background and some props. Plan a few poses in advance, keep everyone squeezed into the frame, and print the best strips afterwards as 4 x 6 sheets. For a bigger event, such as a wedding with a long queue and prints handed out on the night, a hired photo booth with its own printer may suit better.

Where Photo Booth Strips: StripCut helps, and where it doesn’t

Photo Booth Strips: StripCut is our Android app that turns one phone into a photo booth. Prop it up or hold it out, press Go, and it counts down before each photo with a beep. You can retake any shot, pick a frame and add a date stamp, then save the strip to Photos, share it or print it.

Free: the classic 4 shot strip with Cream, Blush and Mint frames, the date stamp, retakes, timer, flash and mirror. Strips are 2 x 6 inches at 450 dpi, comfortably above the 300 dpi labs ask for. Free strips have a small “made with” line at the bottom.

Pro, a one-time purchase: seven more frames, the 3 shot strip and 2 x 2 grid, your own caption, removal of that line, and print sheets that put two strips side by side on one 4 x 6 print, ready for a photo kiosk and to cut down the middle.

Where it doesn’t help: it is not a printer, so you still need a home printer, a kiosk or a lab to get paper copies. It works on one phone, and photos stay on that phone unless you share them, so guests won’t get copies automatically. For a large event that needs instant prints for every guest, a hired photo booth or a print service may be the better choice.

Questions people ask

What size are photo booth strips?

The classic strip is 2 x 6 inches, about 5 x 15 cm. Two fit side by side on one 4 x 6 inch print.

How do I print photo strips at a kiosk?

Put two strips side by side on one 4 x 6 image, order it as a normal 6 x 4 print, then cut it down the middle.

What resolution should a photo strip be?

Aim for about 300 dpi: roughly 600 x 1800 pixels for one strip, or 1200 x 1800 pixels for a 4 x 6 sheet of two.

Can I print a 4 x 6 photo strip print at home?

Yes, on any printer that takes 6 x 4 photo paper. Print at actual size with scaling turned off.

Sources

  1. DP-DS620DNP Photo Imaging Europe dnpphoto.eu
  2. DNP DS620A Dye Sub Photo PrinterFotoClub fotoclubinc.com
  3. How to resize an image for printingMax Spielmann maxphoto.co.uk
  4. 6 x 4 Photo PrintsPhoto Zone photozone.co.uk
  5. Resolution ExplainedFromex fromex.com