On this page
Why is my turntable running fast?
These are the causes manufacturers list most often, roughly from most to least likely.
1. The speed setting does not match the record
Audio-Technica’s turntable manuals put this first under “record sounds too fast or too slow”: the deck is set to the wrong speed. Most LPs play at 33 1/3 rpm and most 7 inch singles at 45, but some 12 inch singles and audiophile LPs are cut at 45, so check the label or sleeve. Playing a 33 1/3 record at 45 makes it about 35% fast (45 divided by 33 1/3 is 1.35), which sounds like chipmunks. A record that sounds only slightly fast is a different problem.
2. The pitch control is not at zero
Decks with a pitch slider, often DJ style direct drive models, can be nudged off zero by accident. Audio-Technica’s advice for its direct drive models is to return the pitch slider to its centre detent or press the quartz lock button, which holds the platter at the rated speed. Check your own manual, as controls vary.
3. The belt is riding off its groove
On a belt drive deck, the belt runs around a small pulley on the motor. ION Audio says the most common reason one of its turntables spins too fast is a belt that is not seated in the groove on the motor spindle. If the belt rides above or below the groove, the platter spins too fast. Its fix is to take off the record and mat, find the motor spindle through the hole in the platter, and put the belt back in the groove. If it keeps slipping out, it suggests moving the belt to the middle of the platter’s inner ring.
Some belt drive decks also change speed by moving the belt to a larger step on the pulley. If yours works that way, make sure the belt is on the step for the speed you want.
4. A dirty motor pulley
Reverb’s guide to turntable speed points out that if bits of a worn belt build up on the motor pulley, the platter can turn faster, because the pulley is effectively bigger. It suggests taking the belt off and cleaning the pulley with a cotton bud and denatured alcohol (not rubbing alcohol, which can make the belt slip). A worn or stretched belt more often makes a deck run slow, so if your belt is old, consider a new one made for your model.
5. The deck is not level, or the belt is twisted
Audio-Technica’s Japanese support pages also suggest checking that the turntable sits on a level surface and that the belt is not twisted or stretched. Both are quick to rule out.
How do I know if my turntable speed is correct?
There are three common ways to check at home. Our guide to checking turntable speed covers them in more detail.
- Strobe disc: a printed disc of bars you put on the platter and light with a mains lamp. In the UK you need the 50 Hz version. Reverb explains that if the speed is right the bars appear to stand still, and the faster they drift, the bigger the error. Audio-Technica’s manuals say the same of the strobe dots built into some platters.
- Test record: a record with a known tone, measured with software while the stylus plays. This includes the drag of the stylus.
- Phone app: a phone laid on the platter reads how fast it turns. It is quick and needs nothing extra, but phones vary and the stylus is off the record during the check.
Check with a record and mat on the platter, as you would normally play it, and let the platter settle for a few turns before you judge the result.
Can I adjust the speed myself?
Only with the controls your turntable is designed to give you. If it has a pitch control, fine speed knobs or adjustment holes described in the manual, use those and follow the manual. Reverb’s advice is to adjust 33 1/3 first, then 45, and to have the deck level before you start.
If your deck has no user speed control and it still runs fast after the checks above, the fix is usually a new belt or a repair. Speed adjustments inside the deck are a job for the service manual or a turntable repairer, and anything that involves opening a mains powered deck should be left to someone qualified.
How much off speed is too much?
There is no single figure everyone agrees on. Reverb says it is hard to get a turntable to exactly the right speed, and that with care you should be able to get within about 1%. If you can hear that a record is fast, it is worth fixing. If you only see it on a measurement, decide whether it bothers you before taking the deck apart.
Questions people ask
Why is my record player playing too fast?
Most often the speed is set to 45 for a 33 1/3 record. If the speed setting is right, check the pitch control, then the belt on the motor pulley.
Why does my turntable spin too fast after changing the belt?
ION Audio says a belt that sits above or below the groove on the motor spindle makes the platter spin too fast. Reseat it in the groove.
Can a stretched belt make a turntable run fast?
Usually the opposite. Reverb notes that a stretched belt tends to slip and slow the platter, while a build up of belt residue on the pulley can make it faster.
Do I need a 50 Hz or 60 Hz strobe disc?
In the UK and Europe, 50 Hz. North America uses 60 Hz.
Where Turntable RPM & Speed Checker helps, and where it does not
Turntable RPM & Speed Checker is our Android app for checking platter speed with your phone. Lay the phone flat on the spinning platter and tap Start. It waits for the platter to settle, times five whole turns, buzzes and holds the result, so you read it after you pick the phone up: the rpm and how far it is from 33 1/3, 45 or 78. Phone motion sensors can be out by a percent or more, so each reading is also timed against the phone’s compass, which goes round once with each turn. If a magnet near the platter blocks the compass, the app tells you.
That check is free. A one-time Pro purchase adds history for each turntable, a fine-tune mode with a FAST or SLOW cue for decks that have a speed adjustment, a wobble graph and extra speeds.
Where it helps: a quick look at whether your deck really is running fast, and a before and after check when you reseat a belt or reset a pitch control.
Where it does not: it is not a lab instrument, and it measures with the stylus off the record, so it does not include stylus drag. For fine setup work a test record is more precise, and it cannot fix a deck that has no speed control. For that you need a new belt or a repairer. Never leave your phone on a spinning platter unattended.
Sources
- AT-LP120-USB Direct-Drive Turntable user manualAudio-Technica docs.audio-technica.com
- AT-LP7X User ManualAudio-Technica docs.audio-technica.com
- What to do if a record plays too fast or too slowAudio-Technica Japan support.audio-technica.co.jp
- Why is my turntable spinning too fast or too slow?ION Audio support.ionaudio.com
- Dialing In Your Turntable SpeedReverb reverb.com